Electrical Hazards Quiz

1.   The following is not a good conductor: a) Copper, b)Aluminum, c)Gum rubber, d)Water
2.   Contact with electricity can cause: a)Death, b)Burns, c)Muscle contractions, d)All of the above
3.   Before attempting to extinguish an electrical fire, it is best to: a)Notify MSHA, b)Cut the power, c)Use water hoses, d)Find a good class A extinguisher
4.   Electrocution can occur with currents as small as: a)5mA, b)75mA, c)1  Amp, d)10 Amps
5.   110 volts is less deadly than 480 volts. True/False
6.   One of the biggest hazards of working with car batteries is: a)Electrocution, b)Chemical burns, c)Explosion, d)Both b and c
7.   Which would have the lowest resistance: a)A large diameter copper wire, b)A small diameter copper wire, c)A small diameter aluminum wire, d)A pencil lead
8.   The ground prong on a drop cord is designed to: a)Save people, b)Reduce resistance, c)Improve voltage, d)Increase amperage
9.   Electrical lockouts must be made by: a)Each person working on the machine, b)Foremen only, c)Electricians only, d)Locksmiths
10. Welding machines cannot cause electrocution. True/False
11. Never grab a cable: a)If it's smoking, b)At a splice, c)Near damaged insulation, d)All of the above
12. Current overload protection is provided by: a)Fuses, b)Transformers, c)Circuit breakers, d) a and c
13. If you forget to lock out a machine before working on it: a)It is okay as long as your partner did, b)You may die, c)You may not go home with all your body parts, d)Both b and c
14. If a crane comes in contact with high voltage powerlines, you should: a)Jump off the crane only if the crane catches fire and shuffle away, b)If near the crane, remain where you are without moving until the power is cut, c)Run away, d)Lower the crane boom if you are already on the crane
15. Driving over drop cords is OK if you: a)bridge the cord, b)cut the power, c)have bias-ply tires, d)bury the cord
16. When pulling disconnect switches, you should: a)Wear rubber boots, b)Stand on steel plates, c)Stand to the side of the switch, d)Use hot line tools
17. The larger the rating (number) of the fuse, the more current it can handle. True/False
18. Transformer enclosures must be: a)At least 6 feet high, b)Below ground level, c)Locked, d)Painted grey
19. Except for battery-operated equipment, all metal enclosing electrical circuits must be: a)Copper, b)Grounded, c)Labeled, d)Guarded
20. Larger motors need larger wires because: a)They need more current, b)          They need more voltage, c)They have lower resistance, d)They have smaller conductors
21. Truck tires are good insulators. True/False
22. Lightning will not strike rubber-tired equipment. True/False
23. Which should you avoid during an electrical storm? a)Plumbing fixtures, b)Standing near windows, c)Trees or fences, d)Standing near heavy equipment, e)All of the above
24. Power switches must be labeled unless obvious by location. True/False
25. Electrical lights that by their location present a shock or burn hazard have to be guarded. True/False
26. Cover plates be removed from electrical equipment: a) when testing them, b) when repairing them, c) whenever the lights are on.
27. If you found the grounding plug had been broken off of an electric drill, what should you do? a)Leave it alone, b)Tag it out, c)Use it only with a GFCI, d)Wear linesman’s gloves when using it
28. You cannot be electrocuted if you use a GFCI. True/False
29. All electrically powered equipment must have: a)An on-off switch, b)A UL rating, c)A frame ground, d)Labels
30. Electric arc welding in the rain is okay if: a)Low settings are used, b)Wearing appropriate PPE, c)You are a certified welder, d)Never, unless you have a death wish
31. A missing knock-out plug on a live electrical box results in: a)A non-S&S citation, b)An S&S citation, c)Nothing, d)Better air circulation

Answers: 1)c, 2)d, 3)b, 4)b, 5)a, 6)d, 7)a, 8)a, 9)c, 10)False, 11)d, 12)d, 13)d, 14)abd, 15)ad, 16)ac, 17)True, 18)c, 19)b, 20)a, 21)False, 22)False, 23)e, 24)True, 25)True, 26)ab, 27)b, 28)False, 29)a, 30)d, 31)b